1. <track id="5b3j9"></track>
  2. <track id="5b3j9"><div id="5b3j9"><td id="5b3j9"></td></div></track>
    <nobr id="5b3j9"></nobr>

    1. 產品展示
      查看分類
      CJ-816R 四崗位熱壓定型機
      CJ-816R 四崗位熱壓定型機


      CJ-816R 四崗位熱壓定型機(可選配安全光幕,模具安裝油路)

      CJ-816R Hot forming machine  (optional safety light curtains, mold installation oil)

      適用范圍:

      本機適用于PU皮、牛皮、豬皮、活動鞋底、泡棉、鞋面、針織棉成型或各式皮件熱壓紋成型。各類EVA產品、鞋底、活動鞋墊及沙灘鞋面等材料的冷壓定型、可制作成鞋墊、鞋面、鞋底、箱包、眼鏡盒,手袋等產品。

      技術參數:

      壓力:16               

      模板尺寸:260毫米×360毫米(可訂制不同尺寸) 

      電壓:380V               

      最長壓合行程:150毫米(可訂制不同尺寸) 

      電機功率:2.2千瓦         

      加熱板功率:1.5千瓦×12/8

      整機重量:六崗位 1.8, 四崗位 1.2          

      外形尺寸:六崗位 2.9米×0.7米×2, 四崗位2米×0.7米×2

      配備特點:

      1、  本機乃龍門式結構設計,承受壓力大,抗張力強,壽命長。

      2、  采用進口液壓配件和高壓力低能耗之油壓動作系統及機械保壓控制回路,加壓時間短,成型效果好,效率高。

      3、  配有簡易油溫冷卻管,防止油溫過高,使油封和油壓配件的使用壽命達到最高。

      4、  每個工作崗位的油路系統均為獨立控制,均配有自動時間控制器和計數器,可單獨工作。分開對應排放,故障判斷簡單快捷,維修方便。

      5、  采用鋁合金加熱板熱壓成型,溫控采用智能型溫控系統,精度高,溫度可自由調整,上下??筛鲃e控制溫度,最高溫可達350度,使產品達到更完美及精確之壓著成型。

      6、  可根據客戶需要提供熱定型、冷定型或二冷二熱機型及不同的模板尺寸。

      7、  可選配模具安裝油路,上升下降位置均可自由定位,更換模具方便快捷。

      8、  也可選裝安全光幕,防止操作工人壓到手指。

      9、  集中電氣控制箱,電氣元件分布合理, 每條線都做有記號,診斷維修簡單快捷,不易出故障,控制系統更為可靠.

      Application:

      This machine is suitable for PU leather, cowhide, pigskin, activities soles, foam, shoe, leather goods, all kinds of knitting cotton molding or hot embossing molding. All kinds of EVA products, soles, insoles and sandals surface active materials such as cold setting, can be made into insoles, uppers, soles, bags, glasses case, handbag and other products.

      . Technical parameters:

      Pressure: 16 tons template

      Size: 260 mm × 360 mm (can be ordered in different sizes)

      Voltage: 380V

      Maximum pressure combined stroke: 150 mm (can be ordered in different sizes)

      Motor Power: 2.2 kilowatts

      Heating plate power: 1.5 kilowatts × 12 block / 8 block

      Weight:  6 STATIONS  1.8 tons,   4 STATIONS  1.2 tons

      Dimensions: 6 STATIONS 2.9 m × 0.7 × 2 m ,

                         4 STATIONS 2 m × 0.7 × 2 m

      Features:

      1.      The machine is a gantry-type design, to withstand pressure, anti-Zhang Liqiang, long life.

      2.      Imported hydraulic parts and low power consumption of high-pressure hydraulic systems and motion control loop mechanical pressure, pressure time is short, forming effective and efficient.

      3.      With a simple oil cooling, to prevent high oil temperature, oil seals and hydraulic components to achieve maximum service life.

      4.      Each job are independently controlled hydraulic system, equipped with automatic time controller and counters, can work alone. Separated from the corresponding emissions, failure to determine the simple and quick, easy maintenance.

      5.      Hot forming aluminum heating plate, temperature control using intelligent temperature control system, high precision, temperature can be adjusted up and down mode can be individually controlled temperature, the temperature can reach 350 degrees, so that products reach more perfect and precise The pressing molding.

      6.      According to the customer needs to provide heat setting, cool setting, or two cold two hot models and different template sizes.

      7.      Optional installation of circuit die, up down position can be freely positioned, quick and easy replacement of the mold.

      8.      And optional safety light curtains, to prevent the operation of the workers down to the fingers.

      9.      Centralized electrical controlling box, a reasonable distribution of electrical components, mark each line are doing a diagnostic repair quick and easy, not easy to fail, the control system more reliable.

       


      數據提供:天助網    
      商盟客服

      您好,歡迎蒞臨超駿機械,歡迎咨詢...

      蔡先生: 點擊這里給我發消息
      正在加載

      觸屏版二維碼

      一级大香一级大香香蕉,日欧美在线,色开心噜噜色噜噜,2020最新啪啪,欧美系列Tⅴ-天堂欧美AV二区免费